RT series
RT series RO Water Filtration System Industry Filter System Johor Bahru (JB), Skudai, Malaysia. Suppliers, Supplier, Rental, Supply | IDE Water Industry Sdn Bhd

RT Series

  • Industrial RO Systems
  • RT series Reverse Osmosis System

Product Overview:

The RT series reverse osmosis system are designed for treating low to moderate TDS feedwaters encountered in municipal supplies, dam and river waters, bore and brackish water sources. These basic systems are designed to be simple to install, operate and require little maintenance. A membrane flush facility is standard and operates each time the system is started to assist with keeping the membranes clean. Continual monitoring of feedwater pressure, RO permeate quality and storage tank level is performed by the integrated microprocessor based controller. ROTEK's Reverse Osmosis systems are capable of removing salts as well as other impurities such as bacteria, sugars, proteins, dyes and constituents having a molecular weight greater than 150-250 dalton.

Product Features:

  • High pressure stainless steel membrane housing
  • Low Energy TFC spiral membrane
  • High Pressure Schedule 80 pipe work
  • Anti-corrosion multistage pump
  • Microprocessor controller with TDS readout
  • Automatic flush with raw water
  • Low feedwater pressure sensor
  • Storage tank level sensor input
  • Permeate and reject flow rotameters
  • Adjustable pressure regulator valve
  • Liquid filled pressure gauges (Filter Feed, RO Feed)
  • Concentrate recycling valve
  • Electro-polished stainless steel frame
  • Powder coated control panel with power supply provisions for pre-filters


Specifications Models

RT 1500

RT 3000

RT 4500

RT 6000

RT 7500

RT 9000

Permeate Flow


1500 / 250

3000 / 500

4500 / 750

6000 / 1000

7500 / 1250

9000 / 1500

Module Qty & Size

(1), 4"x40"

(2), 4"x40"

(3), 4"x40"

(4), 4"x40"

(5), 4"x40"

(6), 4"x40"

Nominal Recovery


Motor (kw)







Weight (kg)







Dimension (mm)

530 x 530 x 1150

Feed Water Requirments:

  • pH: 3.0 : 10.0

  • TDS: < 2,000 ppm (choose BW systems when exceed)

  • Turbidity: < 1.0 NTU (required pre-treatment when exceed)

  • SDI: < 5.0 (required pre-treatment when exceed)

  • Hardness: < 50 ppm (required pre-treatment when exceed)

  • Residual Chlorine: < 0.1 ppm (required pre-treatment when exceed)


Feed water quality, pressures and flow rates have a significant impact on the performance of any reverse osmosis system. To ensure reliable and consistent long-term performance, it is important to supply feed water having the minimum specifications detailed below. If your feed water supply is marginal, you should consider using a feed water break tank and booster pump to supply the system.

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version